
<!-- begin hiding script
slidesb=new slideshow("slidesb");
// Parameters are img, large img, caption, optional target, optional attributes
// NOTE: You must add pointer to first image in form as well !!

slidesb.add_slide(new slide("photos_ss/startdiy.gif", "photos_ss/startdiy.gif",
 "Click START to start the presentation or click on the > button to view images."));

slidesb.add_slide(new slide("photos_ss/diyb1.jpg", "photos_ss/diyb1.jpg",
 "For removal of a painted name or rego. sand paint off using wet & dry sandpaper - 600 grade.  Finish off with 1000 grade paper."));

slidesb.add_slide(new slide("photos_ss/diyb2.jpg", "photos_ss/diyb2.jpg",
"For removal of a vinyl name or rego. try to lift vinyl with fingers.  If this is not possible, use a razor blade being careful not to dig into gelcoat.  Then remove glue with acetone or wax & grease remover (automotive product)."));

slidesb.add_slide(new slide("photos_ss/diyb3.jpg", "photos_ss/diyb3.jpg",
"After both removal processes, clean the surface with a cutting polish and then again with acetone or wax & grease remover."));

slidesb.add_slide(new slide("photos_ss/diyb4.jpg", "photos_ss/diyb4.jpg",
"Position the name onto the boat and attach with masking tape."));

slidesb.add_slide(new slide("photos_ss/diyb5.jpg", "photos_ss/diyb5.jpg",
"Create guidelines for position of the name by running a black china graph pencil across the name onto the boat surface.   Make several marks along the length of the name, horizontally and vertically."));

slidesb.add_slide(new slide("photos_ss/diyb6.jpg", "photos_ss/diyb6.jpg",
"Remove the backing material from the base colour of the name.  Spray the adhesive side of vinyl with a soapy water mix (refer Kit contents).  Also spray the surface you are working onto. This allows some movement of the vinyl until it is correctly positioned."));

slidesb.add_slide(new slide("photos_ss/diyb7.jpg", "photos_ss/diyb7.jpg",
"Position the name using the guide marks you created. Using the squeegee, press the vinyl firmly onto the surface.  Move from the middle to the outer edges of the name."));

slidesb.add_slide(new slide("photos_ss/diyb8.jpg", "photos_ss/diyb8.jpg",
"Pull the application material at 180º? i.e. back on itself.  If the letters pull up, carefully squeegee them back into place and allow more drying time."));

slidesb.add_slide(new slide("photos_ss/diyb9.jpg", "photos_ss/diyb9.jpg",
"Remove the backing material from the top colour of the name.  Lightly spray the adhesive side of the vinyl and the surface you are working onto."));

slidesb.add_slide(new slide("photos_ss/diyb10.jpg", "photos_ss/diyb10.jpg",
"Position the top colour over the base colour and using the squeegee, press the vinyl firmly onto the surface.  Move from the middle to the outer edges of the name."));

slidesb.add_slide(new slide("photos_ss/diyb11.jpg", "photos_ss/diyb11.jpg",
"Remove the application material, pulling slowly."));

slidesb.add_slide(new slide("photos_ss/diyb12.jpg", "photos_ss/diyb12.jpg",
"Remove the pencil marks with cutting polish.  If there are any small bubbles in the vinyl these will dry out over the next few days.  For larger bubbles, lightly pinprick and push excess water out with your fingers."));

slidesb.add_slide(new slide("photos_ss/diyb13.jpg", "photos_ss/diyb13.jpg",
"Stand back and admire your workmanship. Font used: Caslon OpenfaceColours: Font is Dark Navy with silver outline/infill"));


// end hiding script -->